Skip to content

What is WPM? Words per minute, CPM and accuracy

WPM means words per minute, the standard measure of typing speed. See how gross and net WPM, CPM and accuracy are calculated, with worked examples.

6 min read

WPM means words per minute. It is the standard measure of typing speed, and a "word" in it is not a dictionary word but five keystrokes, with spaces and punctuation counted.

So what is WPM in practice? Type 250 characters in one minute and you have typed 50 standard words, which is 50 WPM. Everything else in this article is a refinement of that sum: what happens with errors, with tests longer than a minute, and with other units such as CPM.

What is WPM, exactly?

The formula for the basic figure, called gross WPM, is:

Gross WPM = (characters typed ÷ 5) ÷ minutes

"Characters typed" includes letters, digits, punctuation and spaces. Keys that put nothing on the page, such as Shift, do not count.

Why a word is five characters

Real words differ in length. "I am at it" is four dictionary words in 10 keystrokes. "Particularly characteristic" is two words in 27. If tests counted dictionary words, an easy passage would give everyone a higher speed.

The five-character rule removes that problem. It is used by typing tests and by researchers: the authors of the largest study of typing so far computed speed with one word defined as five characters. By that rule "typewriter" (10 letters) counts as two words, and "I am" (4 characters with its space) counts as 0.8 of a word.

Gross WPM and net WPM

Gross WPM ignores mistakes. Net WPM takes them out. The common convention is:

Net WPM = gross WPM − (uncorrected errors ÷ minutes)

Only errors still on the page at the end are subtracted. A mistake you went back and fixed is not penalized directly, although the time spent fixing it has already lowered your gross speed.

Worked example: a one-minute test

You type 300 characters in 1 minute and leave 4 errors.

  1. Words: 300 ÷ 5 = 60.
  2. Gross WPM: 60 ÷ 1 = 60.
  3. Errors per minute: 4 ÷ 1 = 4.
  4. Net WPM: 60 − 4 = 56.

Worked example: a five-minute test

You type 1,380 characters in 5 minutes and leave 10 errors.

  1. Words: 1,380 ÷ 5 = 276.
  2. Gross WPM: 276 ÷ 5 = 55.2.
  3. Errors per minute: 10 ÷ 5 = 2.
  4. Net WPM: 55.2 − 2 = 53.2.

Note that both the words and the errors are divided by the minutes. Forgetting the second division is the usual slip when people score a long test by hand.

Not every test scores the same way

The formulas above are the common convention, not a law. Some tests count only correctly typed words. Some will not let you move on until a mistake is fixed, so there are no uncorrected errors to subtract. Some report gross speed and accuracy separately and leave net speed out. Compare your scores on the same test over time, not between sites.

CPM, KPH and other units

CPM is characters per minute. It is the same measurement before the division by five:

WPM = CPM ÷ 5

CPM WPM
150 30
200 40
250 50
300 60
400 80

CPM is handy for languages and scripts where "five characters per word" fits badly, and it gives a finer-grained number for short tests.

Key depressions per hour, often written KDPH or KPH, is used for data entry work and in some government exams. To convert, divide by 60 to get keystrokes per minute, then by 5.

Key depressions per hour Per minute WPM
8,000 133.3 26.7
9,000 150 30
10,500 175 35
15,000 250 50

These are real thresholds. India's Staff Selection Commission sets its typing test at 35 words per minute in English and 30 in Hindi, and its exam notice states that these "correspond to about 10500 key depressions per hour" and about 9,000. Its data entry posts ask for 8,000 or 15,000 key depressions per hour, depending on the department.

How accuracy is calculated

Accuracy is the share of your keystrokes that were right:

Accuracy = (correct characters ÷ total characters typed) × 100

Type 1,380 characters with 1,352 correct, and accuracy is 1,352 ÷ 1,380 = 0.9797, or about 98.0 percent.

Accuracy and net WPM treat errors differently. Accuracy usually counts every wrong keystroke, including ones you fixed. Net WPM subtracts only the ones you left. A typist who makes many errors and fixes them all can show a clean page, a net speed equal to gross speed, and still a poor accuracy figure.

What an accuracy requirement really asks

Employers often set speed and accuracy together. The US federal standard for clerical positions asks clerk-typists for 40 words per minute, based on a five-minute sample with three or fewer errors. The arithmetic:

  1. 40 WPM × 5 minutes = 200 words.
  2. 200 words × 5 = 1,000 keystrokes.
  3. 3 errors in 1,000 keystrokes = 0.3 percent wrong, so 99.7 percent accuracy.

A requirement that sounds modest in speed is strict in accuracy.

What is the average WPM?

The best large-scale figures come from two studies by researchers at Aalto University and the University of Cambridge, both run through a typing-test website.

Group Average Source
168,960 volunteers on keyboards 51.56 WPM Dhakal and others, 2018
37,370 volunteers on phones 36.2 WPM Palin and others, 2019

In the keyboard study, the slowest tenth typed below about 26 WPM and the fastest tenth above about 78. The standard deviation was about 20, so a wide band of speeds is normal.

The volunteers chose to take a typing test, which suggests they type more than most people. The average for the whole population is probably lower, and no study of similar size measures it. For what counts as slow, good and fast, and for typewriter-era records, see what is a good typing speed. For breakdowns by age and by occupation, see average typing speed by age and job.

How to measure your own WPM

  1. Take a one-minute typing test for a quick reading, and a five-minute test for a speed you can sustain. The longer figure is usually lower and is the one employers test.
  2. Write down net WPM and accuracy together. One without the other says little.
  3. Repeat on the same test weekly. A change of two or three WPM between single attempts is ordinary variation, so look at the trend over several tries.

To score a passage you typed elsewhere, paste it into the word counter to get the character count, divide by five, and divide by the minutes you took.

If your goal is to raise the number, how to type faster covers the methods that have evidence behind them.

Sources

Questions people ask

What does WPM mean?
WPM means words per minute. In typing it is the number of standard five-character words you type in one minute, where spaces and punctuation count as characters.
What is the average WPM?
In the largest published keyboard study, 168,960 volunteers averaged 51.56 words per minute. A companion study of 37,370 volunteers typing on phones measured an average of 36.2. Both groups were recruited through a typing-test website, so the general public may be slower.
What is the difference between gross WPM and net WPM?
Gross WPM counts everything you typed, divided by five, per minute. Net WPM subtracts the errors you left uncorrected, counted per minute. At 60 gross with 3 uncorrected errors per minute, net speed is 57.
How do I convert CPM to WPM?
Divide by five. CPM is characters per minute, and a standard word is five characters, so 250 CPM is 50 WPM and 300 CPM is 60 WPM.
Why is a word five characters?
It is a convention that makes scores comparable. Real words vary in length, so a test of short words would otherwise score higher than a test of long ones. Counting five keystrokes as one word, spaces included, puts every text on the same scale.
How many key depressions per hour is 35 WPM?
About 10,500. At five key depressions per word, 35 words is 175 key depressions a minute, and 175 times 60 is 10,500 an hour. India's Staff Selection Commission states the same equivalence in its exam notices.